Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
Normally, when one talks about a static yoke versus a floating yoke, the yokes attach to the axles. In the AVS system, the yokes attach to the eccentrics, so I don't think it is Apples vs Apples. If you are thinking of correcting cam lean by twisting the static yokes, I'm afraid you'd end up torquing the AVS eccentric bearings and cause premature failure. At least my dealer mentioned that a static yoke would likely void any warranty. If you are thinking of installing long axles and QCC's to correct cam lean, then you won't have a functional AVS eccentric. So I don't see any advantage to a static yoke. FWIW, I have an old Browning dual-cam and I've shot both with a Static Yoke and zero cam lean, and with a floating yoke (pigtail arrangement) and it shoots better with the floating yoke.
Reason for Reporting