Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
The AVS uses a floating yoke, you can't correct cam lean. The real question is if the cam lean is enough to affect accuracy? If you can paper tune the bow and shoot tight groups, then the cam lean isn't pertinent. If you can't get the bow to tune or shoot good groups, then a dealer should determine the fix. Laying a shaft against the shelf-side of the cam, if it doesn't cross over the string before the nock point, accuracy usually isn't affected. Hold the bow, my Monster top cam leans \, bottom cam leans /, shafts cross at the nock height:
Reason for Reporting