Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
Well.. A trip from Canada to the US over the weekend.. My sole purpose was to spend some time with the new ChillR as well as sit poolside and relax! Both were accomplished. The demo bow was set up with an ugly cookie rest, peep and D-loop 6" Axion stab... The DW was @ 65#... As many have stated, the draw cycle was VERY smooth.. Equipped with the correct draw length mods the wall was not "mushy" at all as others have stated. Before I continue I must comment on last years Chill... In short, it shot very well as presumed, but the ATA was not to my liking and I could feel the shortness at full draw. This years Chill offering was tweaked for sure... the changes were minimal! A longer ATA and reduced overall bow mass, which was something many had wanted in the McPhearson series of bows. IMO the small "innovating" changes that were made had a drastic change with the overall feel of the bow. At full draw it held on target rock solid... I believe the ATA difference helped make this happen. I used a Carter Just B Cuz release.... The shot was crisp as could be. Shock in the hand afterward was not noticed at all, even though the demo had no wrist sling attached, therefore making the shooter grip the bow a little more than usual. The limb pocket and riser changes this year make the brace height length of 6 1/8 th a non issue in my opinion. After putting at least 30 arrows down range, I was thoroughly impressed! My new 3D bow for this year will most definitely be the ChillR.... If I decide to replace my hunting rig .... which is currently the "old" Dren it will most likely be a ChillR.. Just my thoughts Ken
Reason for Reporting