Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
[quote=597771]Check the bolts (3) on the cam and make sure they don’t/haven’t come loose. If they do/have, take it to a dealer, or DIY if you have a bow press, and have the bolts re-tightened using Blue Loctitethreadlocker. Don’t shoot the bow with loose cam bolts, it won’t tune, and it could damage the cam and limbs. Keep an eye on the roller guard rod … some have come loose. I believe there are two set screws to hold it in place…again, Blue Loctite theadlocker solves the issue. Otherwise just routine inspection and maintenance. Check out the Technical FAQ section for Vince’s Idler Lean and other tuning tips, like walkback tune.
The bow should tune closer to 13/16″ whereas older models tuned closer to 11/16″ centershot using the QAD rests,
nock height should be about 1/8″ to
3/16″ putting the arrow perpendicular to the string
(bowstring plumb, arrow level) with the QAD launcher full up. Congratulations … nice bow.
[/quote]Do you mean in relation to the berger hole. So not straight through the middle of the hole but 1/8th to 3/16th high on the hole?
Reason for Reporting