Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
I will half to explain. I have a 30 inch draw 70 lb helium right hand. I had it shooting great. Then out side shooting back in Febuary and noticed screw backed out on cam and was rubbing limb took to dealer and mathews said rather would replace limbs and cam so replaced limbs and cam went to tune bow and noticed right away arrows would not tear right in paper tearing ledealer took to dealer and he could not get nbroadheads amnd Jedi point back hitting together. Field point now will tear fine at about 8 yards but broad head tears left and low showing weak spine with 340 shafts so dealer wanted to try 400 Tryed them and came closer together so sold 340 s and bought 400 fletched 2 of them and they did the same as the 340 s.
so took back to dealer and he said he had it shooting went back and got it and still shooting broadheads to left about 5 inch at 20 yard so went back to dealer and he said would half to go back to Mathews so called them and tec support at Mathews said you should never have field points and broadheads hitting in same place inappropriate had it shooting great thru paper and field points and broadheads hitting together Before screw backed out so I knew this was wrong bow is now on its way back to Mathews to be checked out anyone else have this problem
Reason for Reporting