Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
First let me thank the community. You've been a tremendous help. Through trial and error I've found the same thing. Really have to ensure the bubble (2 axis?) is centered. I've been able to get most of the tear out. What I'm wondering now is if cam lean may be contributing to the rest of the left tear and BHs flying right. I'm assuming these are related. Is that the case? The specs RH creed 65 lbs 30" draw 30" ata, same tear results with 29" CE red 250 and 350; arrow insects nock when flush against the idler on the shelf? (The outside of the bow close to my arm) side. Is 5/16" away from nock on the riser (inside next to cable rod and reverse assist) side. Looking at the Vince tuning guide it looks like I may need to put some twist. Am I off base? I'm beginning to enjoy this! Almost wish I had a bow press so I could tinker.
Reason for Reporting