Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
When I demo'd a 70/28 Chill, I shot it with Blazer cock vane down (prong-style rest) on a .300 spine shaft and had no contact issues. The Centershot was just outside of 13/16" at 54/64" with a 3/16" nock height. Bow was in spec, timed, tuned and shot tight group at 20 yds. Fletch contact with the cable is a symptom of a problem. I recommend finding the problem and fixing it. Weak spine is one possibility, especially if the bow is tuned to an arrow that doesn't nock with the stiff side of the spine up/down; bow hand torque is another.
If it is not any of the above, next thing to check is limb alignment, cam lean ... something a dealer can do. ... hope this helps.
Reason for Reporting