Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
You need a special jig for the 2" vanes for helical fletch, like the Bohning Helix. It will work fine with the .232" and .239" diameter shafts. You can try a straight 2º offset with the super-skinney shafts (.232" and .239"), but I didn't have much luck. I use FlexFletch FFP-360 vanes (3.6") with a Bitz Helical Clamp on the VAP shafts with good results. With a straight clamp offset 2º I usually have problems with the FFP-360 vanes not adhering at the front and back tips.
Reason for Reporting