Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
Just tried switching limbs top to bottom and limbs all the way down. Rest all the way up and arrow slightly high nock. Still 2 in tear stright down. tiller is the same now at 7 inches. Had to loosen bottom limb bolt three turns to shoot bullet hole. When at rest with three turns out it has the slant like first picture but when fully drawn it changes to almost level. Do not understand why nocking point changes. Changes cam to a longer draw length and same thing. Will go back out and check everything you said again. Thanks again for the help. Pro shop gave up long time ago.
Reason for Reporting