Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
Bearings on the cams fine. Axles straight. I removed the lower limbs from the pockets and swapped left and right limbs. (The cam with slop) After putting the cam and axle back together there was almost zero play. Put it back in the press and put all the cables and strings back on. Checked spec on everything and it was ok. Just put and blade launcher rest on and eye balled centreshot and nocking point. BULLET HOLE on the first arrow.
Dang!! I forgot to order a new set of threads! Gonna have to remove the cams and axles again. LOL!
Reason for Reporting