Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
My experience also has been that the DL runs a bit long. Since the MR-series bows use DL modules, it is not an expensive solution to have extra modules, about $20 a set, and they can be exchanged with a simple hex wrench in a few minutes, no bow press required. FWIW, I'd recommend purchasing at least an extra set of modules 1/2" shorter than whatever fits correctly at peak DW if you want to shoot the bow backed off 5 or more lbs for indoors, etc ... the DL and Brace Height increase by a good amount after about three turns out.
Reason for Reporting