Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
sure,there are several things that need to be checked; 1) rest should have timing marks line up just before full draw(in the last 1-2 inches of draw).there is one mark on the rest,the other is on the thumbwheel. 2) arrow should be about 1/8" nock high with arrow in line with berger hole. 3)has poundage been changed since original setup was done? this can alter rest timing. 4)loop may be pinching arrow nock because of shifting after initial setup. there should be slight clearance above and below nock inside loop. 5) bow should be checked for spec. hope this helps.
Reason for Reporting