Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
[u:15rwbnt1]HELIM OWNERS...[/u:15rwbnt1] I Will address this again with a little more emphasis... There are three bolts/screws Total on the HeliM Cam mod..one is visible and accessible however the other two are hid by the limb...you will need the correct Torx Bit and a press to properly tighten them... It happens with the force the HeliM puts out...the bolts/Screws have blue loc-Tite on them ... but reapply if they are loose... Every HeliM should be checked after the first several hundred arrows like any other bow/cams One will need a press to access them safely... RE:
http://forums.mathewsinc.com/archery-4/ ... se-213632/
Reason for Reporting