Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
[quote="roadhazardj76":3ljejgux]ok so i think i got it. However in your guide there you say with a left lean, you twist the left yoke to lean it right. when you are talking about lean are you talking about the top, bottom of idler or which way the string comes off the idler? Sorry about all the questions i understand your last post and that makes sense, but it seems to counterdict your original. I am just trying to see what i am looking at wrong. Like you said clear as mud.
OK my fault
...I read it again and didnt notice how it reads until now...and see what your saying..its described in the tracking your right it is written confusing...I will rewrite that so it makes clearer.. [b][22) Idler Wheel Lean- most Mathews with normal “string settlement” The idler wheel top will tend to lean to the [u:3ljejgux]bows[/u] left side when held like you were shooting, when bow is relaxed it [u:3ljejgux]will[/u:3ljejgux] look like it is leaning bows top left...but that is slight pull from roller/cable guard, Idler wheel lean is checked at [u:3ljejgux]full draw[/u:3ljejgux] To correct for example Idler Wheel top leaning to bows left.. add twist to Bows[u:3ljejgux] right[/u:3ljejgux] harness loop to adjust IWL straight at full draw, -[bows left loop for Idler wheel top.. right lean].[/b:3ljejgux] Make more sence??..and thank you for pointing that out
Reason for Reporting