Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
[quote]Neil, Thanks for the QCC tip. I took my Reezen to the dealer, and I showed him the link and he'd never heard of anyone in our area with the noise that I have coming from my bow. We followed the instructions and sanded the QCCs smooth, and put em back on. No noise until after about the 10th shot and I could barely hear the clicking noise about every 4th or 5th shot. It's not as prominent or as frequent as it was before. Do you think maybe we didn't sand the QCCs down enough? We even made sure the timing was set correctly. I'm going to try and shoot a few arrows each night the rest of this week to see if it might wear in some (being a new bow and all). My only concern is if that buck of a lifetime gets in front of me and he hears the clicking noise on my draw...oh well!!! Your thoughts??
Thanks a heap for your help. Shoot em straight!!
The finer the sand paper or polished the QCC is.. the better, I use 400 grit than apply powdered graphite to QCC and axle before installing... super quite... Neil
Reason for Reporting