Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
To address the noise of the WB when drawing the bow back, it is caused by the finish on the arrow. Some arrows have a rougher finish, just buy smoother arrows or use a q tip and rub a little cotton on the supporting bristles. The fellow who had poor accuracy when using a small diameter arrow had his arrow nock set to high. The arrow should be just above level. I set mine at 1/16 of an inch. The fellow who had bristles that were mussed up and felt that would cause pulling on his arrow did not have the centershot set correctly. Look up walk back tuning and set your rest correctly. Remember the WB is so forgiving that even when you have it set poorly it still works well. Set it up well and it works even better. Tom.
Reason for Reporting