Report Forum Post
*Note - This report is sent only to the Forum Moderators, no other user will see this.
While the glue is drying you can be working on the dowel holders. Crosscut 6 boards from one of the smaller panels you set aside earlier. Don't use the bigger panels you set aside, they will be used for the top and bottom. Draw a line the long way down the center of each board you just cut, and then mark seven equal marks along that line. Hard to describe but this picture should help. [img]http://rp.smugmug.com/photos/94130565-M.jpg[/img] Now you need to drill 1" holes at each of the marks down the center of the board. You will have this when you are done. [img]http://rp.smugmug.com/photos/94130803-M.jpg[/img][/img]
Reason for Reporting