Which Victory V1 Arrow

Home Forums General Archery Discussion Which Victory V1 Arrow

This topic contains 8 replies, has 6 contributors, and was last updated by kill-em-all KILL EM ALL 5 years, 11 months ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • August 2, 2008 at 11:16 pm #495896 Back to Top REPORT

    Billdean

    Joined: 7/21/2008
    I am confused on which Victory arrow for my set up. I believe a 340 spine arrow shoots better with my set up but not sure with the victory. You can see my signature below.
    August 2, 2008 at 11:48 pm #520751 Back to Top REPORT
    wishbone
    wishbone

    Joined: 2/6/2007
    VForce V1′s 400 is what I would be using in your situation..
    Cut them at 27.50 ” and use 125 g tip…Here’s what On Target 2 software says…

    August 3, 2008 at 12:02 am #520752 Back to Top REPORT
    chopperpoe
    chopperpoe

    Joined: 11/26/2006
    i have the hv 1 350′s at 29 they weigh in at 334 grains im shooting a dxt with a 28 in. draw @66lbs the chrono showed 294 not sure on the ke but its probably more than enough and they fly perfect just my two cents. :thumbup
    August 3, 2008 at 1:55 am #520753 Back to Top REPORT

    Billdean

    Joined: 7/21/2008
    What would be the reasoning for 125 grain tips? What would happen with 100 grain?
    August 3, 2008 at 2:33 am #520754 Back to Top REPORT
    wishbone
    wishbone

    Joined: 2/6/2007
    What would be the reasoning for 125 grain tips? What would happen with 100 grain?

    It would just lower your F.O.C. but you could get away with it ,
    another words your groups might be tighter with 125.. [=}=]

    August 3, 2008 at 9:17 am #520755 Back to Top REPORT
    tangy003
    tangy003

    Joined: 5/28/2005
    IMHO the HV’s are just too light.First off you are going to want to keep near the 5 grain per lb rule and it will be a chore doing so.I too shot/shoot 340 spine arrows and went with the 350 Vforce V1 arrow.Bar none the best arrow I’ve shot to date.Beleive me when I say I literally have tried enough brands and spine legnth combos to last a lifetime or two. [=}=]
    August 3, 2008 at 2:59 pm #520756 Back to Top REPORT

    Billdean

    Joined: 7/21/2008
    Seems like a flip of a coin.
    August 3, 2008 at 3:22 pm #520757 Back to Top REPORT
    gjarcher
    gjarcher

    Age: 71
    Joined: 10/3/2006
    Location: Colorado
    View My Bows
    Seems like a flip of a coin.

    Then, I’d recommend going with the VForce 400 at 28″ length.

    This screenshot is with the hunting filter ON, so there is a slight bias towards a stiffer spine. As can be seen, the 400 would still be slightly stiff, which isn’t a bad thing for broadheads, especially fixed-blade since they tend to tune easier. You can try the 125 grain tips also on this shaft and it may give you better groups, and a quieter bow :smt69

    I agree that the VForce HV series are very light for hunting, better suited for shooting 3D foam than critters, and the 350 spine would be way too stiff for the setup.

    PS – When using OT2!, it automatically inserts the nock adapter weight for the Victory shafts, so if you aren’t using the nock adapter, be sure to zero it out. [=}=]

    August 3, 2008 at 4:46 pm #520758 Back to Top REPORT
    kill-em-all
    KILL EM ALL

    Joined: 1/18/2006
    use the V1400s with a 100grn tip and they fly AWESOME
Viewing 9 posts - 1 through 9 (of 9 total)