Vertical nock height question

Home Forums Archery Tech Forum Vertical nock height question

This topic contains 3 replies, has 3 contributors, and was last updated by lpace lpace 1 year, 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 8, 2013 at 7:41 am #587893 Back to Top REPORT
    lpace
    lpace

    Joined: 11/3/2009
    I just picked up an EZ7 and was messing around with it….  My question comes from the fact that it shot a pretty vicious nock low tear.  So much so that I had to raise the d-loop to the point that the arrow was way out of perpendicular with the string.  Is this normal?  Is there a way to address the issue to get the arrow/string closer to perpendicular with each other?

    Thanks!

    August 8, 2013 at 11:57 am #587938 Back to Top REPORT

    conquestador

    Age: 63
    Joined: 12/10/2009
    Location: Upstate NY
    Sounds more like you need to lower your rest, unless I missed something.
    August 8, 2013 at 12:39 pm #587948 Back to Top REPORT
    bow-drawn
    Bow Drawn

    Age: 63
    Joined: 11/14/2007
    Location: Ohio
    View My Bows
    It sounds like what Conquestador said and another thing to consider that most solo cam bows like 1/8 to 1/4″  nock high setup instead of a perpendicular to the berger hole or rest screw hole.
    August 8, 2013 at 1:23 pm #587957 Back to Top REPORT
    lpace
    lpace

    Joined: 11/3/2009
    I raised my d-loop to the point that the arrow was a fat 1/4″ nock high of perpendicular to the string (the arrow in line with the center of the burger hole).  That seemed to work out fairly well.  So that much beyond perpendicular to the string is not atypical?  If so, okey dokey :)
Viewing 4 posts - 1 through 4 (of 4 total)