Switchback tuning question

Home Forums Archery Tech Forum Switchback tuning question

This topic contains 6 replies, has 3 contributors, and was last updated by  conquestador 1 year ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 1, 2013 at 8:49 pm #572436 Back to Top REPORT

    conquestador

    Age: 63
    Joined: 12/10/2009
    Location: Upstate NY
    I’m new to the tuning game, but I have learned a lot about twisting strings.  I’m working on my Switchback.  LH, 60#, 28″ draw.  Limbs maxed out, proper idler lean, cam properly timed.  ATA is dead nuts on at 33″.  BH is 6-7/8″.  I’ve read Vince’s tuning guide, but I haven’t figured out how to gain that 1/8″ on the BH.  Can anyone get me going in the right direction or point out what I’m missing?  Or is the 1/8″ not worth worrying about?  Thanks for your thoughts and knowledge.
    April 1, 2013 at 9:22 pm #572440 Back to Top REPORT
    bigrobc
    bigrobc

    Age: 33
    Joined: 1/26/2011
    View My Bows
    Your good. Dont overthink it. Test poundage and go kill somethin. 1/8th of a inch is kinda critical
    April 2, 2013 at 10:48 am #572509 Back to Top REPORT
    bow-drawn
    Bow Drawn

    Age: 62
    Joined: 11/14/2007
    View My Bows
    6673_13476_Setting_Your_Single_Cam_Mathews_to_Spec_2_4

    This might help make any adjustments to get ATA, and BH where you want it.

    April 2, 2013 at 5:17 pm #572552 Back to Top REPORT

    conquestador

    Age: 63
    Joined: 12/10/2009
    Location: Upstate NY
    Thanks guys.  Bow Drawn – question:  It looks like what you posted would be helpful, but the resolution at my end is terrible.  I tried searching on Mathews site with no luck.  Can you tell me where you found it?  Thanks again.
    April 2, 2013 at 8:49 pm #572611 Back to Top REPORT
    bow-drawn
    Bow Drawn

    Age: 62
    Joined: 11/14/2007
    View My Bows
    Try looking the thread ( I can’t get into spec) on page two where it is posted there too.
    April 3, 2013 at 8:46 am #572650 Back to Top REPORT
    bow-drawn
    Bow Drawn

    Age: 62
    Joined: 11/14/2007
    View My Bows

    Try looking the thread (  can’t get into spec) on page two where it is posted again there too.

    I tried to clean this one up and raised the pixels to it. Also if you’re not aware you can click on the image now it increases it size.

    6673_13476_Setting_Your_Single_Cam_Mathews_to_Spec_larger

    • This reply was modified 1 year ago by bow-drawn Bow Drawn.
    April 3, 2013 at 5:05 pm #572698 Back to Top REPORT

    conquestador

    Age: 63
    Joined: 12/10/2009
    Location: Upstate NY
    Bow Drawn,  Thank you very much!
Viewing 7 posts - 1 through 7 (of 7 total)