Sure Loc X Press (older style) advice please

Home Forums Archery Tech Forum Sure Loc X Press (older style) advice please

This topic contains 4 replies, has 3 contributors, and was last updated by gjarcher gjarcher 1 year, 2 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 3, 2013 at 9:18 pm #597426 Back to Top REPORT

    BOC

    Joined: 6/12/2006
    Guys,

    I have the older style Sure Loc X Press (the one without the wheels) and am wondering if I should put it on the market. What I like is every Mathews bow on the market can be pressed with this press and can be completely broken down without the USL adapters. If I need to do a limb swap, this press can do it. Can a press like the EZ Press (limb tip compression) completely break a bow down? I need some advice…..should I sell this press or keep it and consider it a good investment.

    Appreciate the feedback.

    October 7, 2013 at 12:46 pm #597938 Back to Top REPORT
    blackdog
    BlackDog

    Age: 63
    Joined: 7/21/2004
    I’m not sure I fully understand why you want to sell the press if it does everything you would need/want it to do?

    Are you wanting to know if the EZ press is better than what you have now???

    October 7, 2013 at 9:24 pm #598047 Back to Top REPORT

    BOC

    Joined: 6/12/2006
    Well yes and also didnt know if it would pay to upgrade to a press that can handle all bows without needing any adapters.  Not sure if Mathews will go to beyond parallel limbs like most other mfgs but if they do, this press will be useless.
    October 8, 2013 at 8:02 pm #598204 Back to Top REPORT

    BOC

    Joined: 6/12/2006
    Still curious though….can you do a complete break down of a bow (limb swap) with the EZ Press?
    October 8, 2013 at 8:59 pm #598222 Back to Top REPORT
    gjarcher
    gjarcher

    Age: 71
    Joined: 10/3/2006
    Location: Colorado
    View My Bows
    Yes, the EZ press can completely break down and re-assemble beyond parallel limb bows.

    I have completely rebuilt a Drenalin and Monster bow using an EZ Press.

    I am very happy with the EZ Press … the only issue is that you must hold onto the bow when backing off the press or it ends up on the shop floor.

Viewing 5 posts - 1 through 5 (of 5 total)