Reezen 6.5 help

Home Forums Archery Tech Forum Reezen 6.5 help

This topic contains 1 reply, has 2 contributors, and was last updated by mathews-technical Mathews Technical 11 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 25, 2013 at 12:10 pm #591858 Back to Top REPORT

    Matsy3

    Joined: 8/25/2013
    I have a 6.5 28 in draw 70 lbs. the problem I am having is its tuned so far to the inside and I still have a left tear and can’t go anymore or I will contact roller gaurd. I had me tech check cam lean an I had a little that he took out but still will not tune. I put a square on my riser and it seems the top is not square with the bottom. I this normal or is the riser bent?

    Sent from my iPhone using Tapatalk – now Free[/URL]

    August 30, 2013 at 6:57 am #592676 Back to Top REPORT
    mathews-technical
    Mathews Technical


    Joined: 7/16/2013
    If your shop can’t figure it out have them contact Mathews.
Viewing 2 posts - 1 through 2 (of 2 total)