Prestige paper tear

Home Forums Archery Tech Forum Prestige paper tear

This topic contains 21 replies, has 3 contributors, and was last updated by gjarcher gjarcher 1 year, 4 months ago.

Viewing 7 posts - 16 through 22 (of 22 total)
  • Author
    Posts
  • June 17, 2013 at 7:19 am #581356 Back to Top REPORT
    gjarcher
    gjarcher

    Age: 71
    Joined: 10/3/2006
    Location: Colorado
    View My Bows
    Could you post a pic of the entire bow, just on the odd chance there is something out of the normal that can be spotted?
    Here is a pic of my Prestige for comparison:
    Elkbow_setup 003

    Prestige3DField2

    June 17, 2013 at 5:49 pm #581406 Back to Top REPORT
    kipkrenz
    kipkrenz

    Joined: 10/5/2005
    Location: California
    View My Bows
    Recently put QAD rest on had a Mathews rest before same results.IMG_0171
    not a very good picture, not a good camera I guess.
    June 17, 2013 at 7:22 pm #581420 Back to Top REPORT
    gjarcher
    gjarcher

    Age: 71
    Joined: 10/3/2006
    Location: Colorado
    View My Bows
    Can you post a close-up of the cam? From the pic it looks like it might be way over rotated…but hard to tell.

    Here is my cam, properly timed. The two timing indents should align parallel with the string, which puts the leading indent just above the limb as shown below:
    PrestigeCam 001

    June 17, 2013 at 8:20 pm #581434 Back to Top REPORT
    kipkrenz
    kipkrenz

    Joined: 10/5/2005
    Location: California
    View My Bows
    Good Eye.  You are right in that picture I was trying different cam positions to see if it made any difference.  But normally it is like this.
    P1030864

    Running out of things to try.

    June 17, 2013 at 8:43 pm #581435 Back to Top REPORT
    gjarcher
    gjarcher

    Age: 71
    Joined: 10/3/2006
    Location: Colorado
    View My Bows
    I’m running out of ideas, too.

    You might want to put and e-clip on the axle if you haven’t done so already. {#emotions_dlg.mathews_peace}

    June 18, 2013 at 7:19 am #581455 Back to Top REPORT
    kipkrenz
    kipkrenz

    Joined: 10/5/2005
    Location: California
    View My Bows
    I see by one of your pictures you have one as an Elk bow.  Any luck with it.   We started archery  Elk hunting a few years ago in Colorado.  My partner I hunt with for the last 42 years is 83 this year and still going.  Told him I would take him as long as he wants to go.  We had some close encounters but so far no  luck but are going to keep trying.  Any way Thanks again for the help and Ideas.   P.S.  Did put clip back on and will take bow or bows to the pro shop.      Kip Krenz
    June 18, 2013 at 7:39 am #581458 Back to Top REPORT
    gjarcher
    gjarcher

    Age: 71
    Joined: 10/3/2006
    Location: Colorado
    View My Bows
    Same bow … I strip it down and reconfigure several times a year.

    Hunted last season with it shooting Victory VAP 300s w/ SS adapter and 100-gr Exodus heads. Had only one opportunity on legal bull, 20 yds on a dead-fast walk, ended up burying the Exodus 4″ into a small sapling, the only obstruction in the 10′ wide shooting lane. The Elk survived, the sapling didn’t. {#emotions_dlg.mathews_brick_wall}

Viewing 7 posts - 16 through 22 (of 22 total)