Paper Tuning my Creed ( Help )

Home Forums Technical FAQ Paper Tuning my Creed ( Help )

This topic contains 3 replies, has 3 contributors, and was last updated by  useyourbow 3 months, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 6, 2013 at 12:02 pm #603782 Back to Top REPORT
    oscare66
    oscare66

    Joined: 2/28/2009
    I am currently getting alot of fish tailing on my arrows so I went to paper tune my bow and I cannot find the center shot for the life of me.  I am set up with a 28″ draw 70#limbs turned down to 60#, I am shooting Gold Tip XT hunter 7595 and my arrow rest is a QAD drop away rest.  I am getting tares to the left of the paper so by my understanding I need to move the arrow rest to the right  but I have moved it as far as I can go and I am still getting the tare to the left,  I need help before I throw my Creed out on the street..  .. Never had problems with my Reezen 6.5 nor my Z7….
    November 6, 2013 at 1:55 pm #603806 Back to Top REPORT
    vince71969
    vince71969


    Joined: 7/5/2004
    View My Bows
    Put the center shot back out to 3/4″ and use paper for setting nock height only. In the FAQ section there’s an article on walk back tuning. Follow the steps and center shot will be set.
    November 6, 2013 at 2:27 pm #603811 Back to Top REPORT
    oscare66
    oscare66

    Joined: 2/28/2009
    Ok  Thanks Vince…
    December 27, 2013 at 1:43 pm #612986 Back to Top REPORT

    useyourbow

    Joined: 5/27/2011

    Put the center shot back out to 3/4″ and use paper for setting nock height only. In the FAQ section there’s an article on walk back tuning. Follow the steps and center shot will be set.

    So, are you saying a Creed cannot be paper tuned or just suggesting your preferred method.

Viewing 4 posts - 1 through 4 (of 4 total)