Options for Mathews SBXT Riser

Home Forums Archery Tech Forum Options for Mathews SBXT Riser

This topic contains 1 reply, has 2 contributors, and was last updated by 99fatboy 99fatboy 7 months, 4 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 27, 2014 at 6:54 am #620763 Back to Top REPORT
    allen1466
    allen1466

    Joined: 8/2/2009
    I purchased a used SBXT that needs some TLC.  It seems the last owner or a previous owner painted the whole bow black including the wood grip.  UUGGHH!!

    I want to give this bow a new life by stripping the old and replace with new.  Can I have the riser stripped and re-anodized?  The limbs I can have dipped to whatever I want.  I will remove the wood grip, strip the paint and try to salvage.  I just can’t sand too much so I wont loose the Mathews and SBXT logo.

    Thanks for reading and your response!

    February 27, 2014 at 8:20 am #620769 Back to Top REPORT
    99fatboy
    99fatboy

    Age: 52
    Joined: 2/15/2010
    Location: n.y.
    Photo Gallery
    Sure, you can have it redipped or anodized.  You can also buy a new grip if you need to. Rahoffer does the dipping for Mathews, although Mathews does their own lost camo dip in house. I would just let whoever is doing the dip or anodizing to also strip riser for you. They will need to prep it for their process anyway.
    black z7 magnum,tommy hogg,qad,b-stingers, vaportrail: blue smoke triumph,sword,hamskae,b-stingers:desert tactical chill R, tommy hogg,limbdriver pro v,ktech
Viewing 2 posts - 1 through 2 (of 2 total)