Nocks, Glue?

Home Forums General Archery Discussion Nocks, Glue?

This topic contains 6 replies, has 7 contributors, and was last updated by tangy003 tangy003 6 years ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • October 5, 2008 at 11:50 pm #495975 Back to Top REPORT
    chapi
    Chapi

    Joined: 9/8/2008
    Do you all put glue on your nocks?
    October 6, 2008 at 12:01 am #522302 Back to Top REPORT
    thunderchicken21
    thunderchicken21

    Age: 30
    Joined: 8/4/2006
    Location: Ohio
    nope [=}=]
    All We Do Is SELFILMED
    October 6, 2008 at 12:07 am #522303 Back to Top REPORT
    sticks
    sticks

    Joined: 2/5/2005
    View My Bows
    Me neither ;)
    How are you living your Dash?
    October 6, 2008 at 1:20 am #522304 Back to Top REPORT
    allen81
    Allen81

    Joined: 8/5/2008
    No.
    Reason: I have cracked 8 nocks in the past 2 months…..so I just pop a new one in and keep going. Better than buying a new arrow. Darn DXT!
    October 6, 2008 at 2:03 am #522305 Back to Top REPORT
    gjarcher
    gjarcher

    Age: 71
    Joined: 10/3/2006
    Location: Colorado
    View My Bows
    Only swagged aluminum arrrows or tapered wood arrows require glue-on nocks. Glue must be used sparingly, otherwise it can weaken the plastic. More recently even aluminum and carbon-aluminum shafts use nock bushings so that nocks are press fit without glue.

    Most carbon arrows accept internal, pressure fitted nocks that do not require glue. Even so, I use the bushings for better precision nock alignment and enhanced nock end protection from robinhoods.

    October 6, 2008 at 3:51 am #522306 Back to Top REPORT
    nippers
    Nippers

    Joined: 1/10/2006
    On all my shaft’s the answer is NO…..but on those that my nephew shoots, yes (they have the point on them that you have to or they will not stay on ……. the shafts that came with his genesis) [=}=]
    October 6, 2008 at 10:39 am #522307 Back to Top REPORT
    tangy003
    tangy003

    Joined: 5/28/2005
    Years ago on older aluminum arrows yes.Today with carbon no glue needed. [=}=]
Viewing 7 posts - 1 through 7 (of 7 total)