MR6 & B mod

Home Forums Archery Tech Forum MR6 & B mod

This topic contains 2 replies, has 2 contributors, and was last updated by kipkrenz kipkrenz 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 16, 2014 at 11:25 am #619624 Back to Top REPORT
    kipkrenz
    kipkrenz

    Joined: 10/5/2005
    Location: California
    View My Bows
    Wanted to change draw length on my MR6 from 29.5 to 30 inch so changed mod to a B which should be 30 inch only now I have no wall. Back is spongy as heck and does not feel right at all.  What could have happened ?  Help
    February 16, 2014 at 12:47 pm #619633 Back to Top REPORT
    99fatboy
    99fatboy

    Age: 52
    Joined: 2/15/2010
    Location: n.y.
    Photo Gallery
    First off, you changed both, right? Secondly, they run long to begin with, are you sure that you are pulling to the wall at all? Third, are they both the same mod, and are you in time? Forth, if you have a drop away tied to the cable, rest may be out of time and you are creating tension thru the drop cord.
    black z7 magnum,tommy hogg,qad,b-stingers, vaportrail: blue smoke triumph,sword,hamskae,b-stingers:desert tactical chill R, tommy hogg,limbdriver pro v,ktech
    February 16, 2014 at 1:03 pm #619635 Back to Top REPORT
    kipkrenz
    kipkrenz

    Joined: 10/5/2005
    Location: California
    View My Bows
    Ya changed both and they are new.  MR-8O on one side and MR-B on the other.  Did disconnect the  drop cord to make sure it was not affecting anything.  Cams are in time and brace height and ATA are good.  I have two MR7 and this one MR6 so have changes mods before and have never had a problem.  No mater how hard I draw there is no wall and it still feels shorter that my MR7’s.  Got me stumped.
Viewing 3 posts - 1 through 3 (of 3 total)