Mathews quivers and small dia shafts

Home Forums Bow Hunting Mathews quivers and small dia shafts

This topic contains 9 replies, has 7 contributors, and was last updated by j-daddy J-Daddy 1 year, 2 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • April 30, 2013 at 12:13 am #576037 Back to Top REPORT

    shane&karie

    Joined: 3/5/2013
    lDo will a vap or injection fit in the mathews quivers
    April 30, 2013 at 12:14 am #576038 Back to Top REPORT

    shane&karie

    Joined: 3/5/2013
    Lol sorry will they fit
    April 30, 2013 at 6:47 am #576044 Back to Top REPORT
    statedriller
    statedriller

    Joined: 9/15/2006
    Location: Call me...867-5309
    The VAPs fit in my T5 just fine.
    The end is near....
    May 1, 2013 at 10:55 pm #576465 Back to Top REPORT
    bootheel-boy
    bootheel boy

    Joined: 7/21/2006
    Location: S.E. Missouri
    VAPs didn’t fit my T3 quiver very well.  The quiver was a few years old and probably had some wear on the grippers. I do believe you can buy new Mathews grippers for your quiver if yours are worn like mine was.   Should be cheaper than buying  a whole new quiver if yours don’t fit.  I loved that ICE coating on the VAPs those arrows are very slick to the touch.  The Easton injexions were very nice but I don’t care for the price or the non standard size insert which would have limited my choices on broad heads.
    May 7, 2013 at 12:03 pm #577184 Back to Top REPORT

    shane&karie

    Joined: 3/5/2013
    Thanks guys I was holding of on arrows and a quiver for my new mr7 till I found out
    May 9, 2013 at 10:08 am #577386 Back to Top REPORT
    vatechhunter
    VaTechHunter

    Age: 30
    Joined: 3/22/2010
    Photo Gallery
    Axis FMJs worked great with my T5 quiver and they are small diameter.
    2009 Reezen 6.5 camo/black | 2012 Helim camo | 2012 Z9 black | 2013 MR7 camo | 2014 Chill R tactical | Used Ovation camo/black
    May 12, 2013 at 4:45 pm #577721 Back to Top REPORT
    bohuner
    bohuner

    Joined: 6/24/2007
    I use Axis lost camo  in my T5 never had problem with them falling out.
    May 22, 2013 at 4:23 pm #578683 Back to Top REPORT
    j-daddy
    J-Daddy

    Joined: 3/11/2008
    The thing with the Axis/FMJ arrows is that they are almost twice as big as VAPs…A VAP will almost fit inside an AXIS shaft.
    Best quiver you can get for VAPs is the TightSpot because you can adjust the grippers on it.
    May 23, 2013 at 7:17 am #578741 Back to Top REPORT
    straightedge123
    StraightEdge123

    Joined: 10/22/2007
    I have a two piece quiver that has the sliding mechanism on the lower piece that will grip them just fine.
    Mathews S2 / Copper John 4-pin / QAD HD LD / Worlds Best Strings / 808 Bowslings / Easton Bloodlines
    May 23, 2013 at 10:20 am #578773 Back to Top REPORT
    j-daddy
    J-Daddy

    Joined: 3/11/2008

    I have a two piece quiver that has the sliding mechanism on the lower piece that will grip them just fine.

    Yeah I forgot you could adjust the gripper on the older 2 piece Mathews quivers…I’ve heard mixed reviews on the T series and VAPS, few people have said they hold them fine, few have said they are to loose…Seems kinda hit or miss on the rubber gripper if it’s gonna be tight enough on them or not. That’s one of the reasons I like the TightSpot, everything is adjustable on it.

Viewing 10 posts - 1 through 10 (of 10 total)