Mathewa Q2XL

Home Forums Technical FAQ Mathewa Q2XL

This topic contains 3 replies, has 2 contributors, and was last updated by indychris Indychris 1 month, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 7, 2014 at 10:22 pm #633038 Back to Top REPORT
    michaelwilson1992
    Michaelwilson1992

    Joined: 7/8/2014
    Location: IN
    Hello everyone. My father recently gave me a Mathews Q2XL. The draw length is too long for me and I need it shortened. The current cam doesnt have any extra notches to adjust the legnth. How do I know which cam to get my correct raw legnth? My drawlegnth should be 26 1/2. (not sure what the current length is set to) Any help is apperciated thanks guys.
    July 8, 2014 at 9:38 am #633057 Back to Top REPORT
    indychris
    Indychris

    Joined: 6/22/2004
    The cam chart that I have shows that there is not 26.5″ cam for the Q2XL. There does appear to be a 26″ (cam: SL2FL) and a 27″ (cam: SL2EL)

    Maybe someone from the tech area will chime in and correct me if my info is incorrect. I hope you get it set up. I’ve always liked the Q2XL.

    July 9, 2014 at 2:09 pm #633145 Back to Top REPORT
    michaelwilson1992
    Michaelwilson1992

    Joined: 7/8/2014
    Location: IN
    Thanks Inndychris. The current cam on my bow is marked SL2CR. Can you by chance tell me what the draw legnth is on this cam? Thanks.
    July 9, 2014 at 6:15 pm #633154 Back to Top REPORT
    indychris
    Indychris

    Joined: 6/22/2004
    On the Q2XL, the SL2CR is a right hand, 29″ cam.
Viewing 4 posts - 1 through 4 (of 4 total)