Seeing as Mathews bows run about a half inch long, when inputting the data into the various sighttape software, should i enter the draw length of the cam or the measured draw length of string to front of riser shelf?
I put a piece of masking tape on my sight. I shoot 20 and mark it with a pen, then 30, etc…to 60 . Then find the printed tape that matches the pen marks on the masking tape. That way I know the marks on the printed tape are perfect, with no doubt.
They print fine on my home computer . I cut them out ,waterproof, and put clear tape over them .
DP in Co
This reply was modified 1 year, 11 months ago by Arrow Star.