Making sight tapes

Dear Mathews Family –

We're excited to announce the launch of the all-new coming very soon. We appreciate the support and feedback of this active online community, however, we will not be hosting a forum on the new site. We invite you to connect with us and each other on social media and other forums (Facebook, Instagram, Twitter,, and, where your passion and experience can be shared with a wider audience to help grow this sport.

Home Forums Archery Tech Forum Making sight tapes

This topic contains 1 reply, has 2 contributors, and was last updated by arrow-star Arrow Star 2 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • May 3, 2013 at 3:27 pm #576746 Back to Top REPORT


    Joined: 1/18/2011
    Seeing as Mathews bows run about a half inch long, when inputting the data into the various sighttape software, should i enter the draw length of the cam or the measured draw length of string to front of riser shelf?
    May 3, 2013 at 3:54 pm #576749 Back to Top REPORT
    Arrow Star

    Joined: 11/22/2009
    View My Bows

    I put a piece of masking tape on my sight. I  shoot 20 and mark it with a pen, then 30, etc…to 60 . Then find the printed tape that  matches the pen marks on the masking tape. That way I know the marks on the printed tape are perfect, with no doubt.

    They print fine on my home computer . I cut them out ,waterproof, and put clear tape over them .

    DP in Co

    • This reply was modified 2 years, 9 months ago by arrow-star Arrow Star.
Viewing 2 posts - 1 through 2 (of 2 total)