HOW TO: Remove and Replace Your Grip

Home Forums Technical FAQ HOW TO: Remove and Replace Your Grip

This topic contains 107 replies, has 54 contributors, and was last updated by gjarcher gjarcher 3 months ago.

Viewing 15 posts - 61 through 75 (of 108 total)
  • Author
    Posts
  • May 12, 2008 at 2:53 pm #499769 Back to Top REPORT
    jerseyboy
    JERSEYBOY

    Age: 42
    Joined: 2/25/2008
    View My Bows
    Thanks alot! :thumbup [=}=]
    November 9, 2008 at 7:29 pm #499770 Back to Top REPORT
    deer-slaughterer
    Deer Slaughterer

    Joined: 1/7/2008
    thanks so much that is really helpful and I will definetly refer back to this when replacing grips
    March 10, 2009 at 2:20 am #499771 Back to Top REPORT
    redneck0372
    redneck0372

    Joined: 1/13/2008
    thanks this helped me to replace my grip
    March 13, 2009 at 4:51 pm #499772 Back to Top REPORT
    wyohunter
    WyoHunter

    Joined: 1/1/2009
    Great post! Be putting a new one on shortly.
    March 21, 2009 at 5:55 am #499773 Back to Top REPORT
    nollid88
    nollid88

    Joined: 9/14/2007
    got my grip off. Have a Tronjo to put on. It fits really tight now w/out any glue. I barely got it back off. Should I sand it to fit a little looser or leave it tight?
    April 28, 2009 at 9:45 pm #499774 Back to Top REPORT
    womack7-0
    womack7.0

    Joined: 4/27/2009
    excellent post. Never had a problem. Thanks
    June 16, 2009 at 7:14 pm #499775 Back to Top REPORT
    klemsontigers7
    klemsontigers7

    Joined: 9/1/2006
    Trying this today… who else has done it?
    June 16, 2009 at 7:15 pm #499776 Back to Top REPORT
    klemsontigers7
    klemsontigers7

    Joined: 9/1/2006
    Oopps… thought this was the thread about sanding down your Mathews grip.
    August 20, 2009 at 3:33 am #499777 Back to Top REPORT

    jerlaur

    Joined: 8/10/2009
    :) I just took the grip off my dxt and to remove the glue I use zippo lighter fluid. It worked great. It didnt remove any of the camo dip.
    August 20, 2009 at 6:01 pm #499778 Back to Top REPORT
    l-o-s-t-arrow
    L.O.S.T.Arrow

    Joined: 5/16/2006
    Location: Alberta
    :) I just took the grip off my dxt and to remove the glue I use zippo lighter fluid. It worked great. It didnt remove any of the camo dip.

    :welcome to the forum…Glad it worked …however lots of harsh chemicals will work…but are not recommended and may void some Warranty’s…

    Neil

    August 20, 2009 at 6:33 pm #499779 Back to Top REPORT

    jerlaur

    Joined: 8/10/2009
    Thank you, Neil. I have learned a lot from you and your posts thank you for all the information. At first I thought I grabbed the goo be gone and then realized it was zippo lighter fluid. When I had linoleum floors put in my house thats what the guy said to use to get the glue off the seams when the glue was dry. It worked good for that and also for the glue on the grip. I was weary though. Mosquito spray on your hands will take the camo off of a bow. Not that I wanted it to.
    December 31, 2009 at 7:29 pm #499780 Back to Top REPORT
    z7hunter
    Z7Hunter

    Joined: 12/20/2009
    FYI

    When I put my custom grip on, I didnt replace the adhesive. Just popped off old one using hairdryer technique and then popped on new one, heated handle and then tied up tight. No probs.

    January 4, 2010 at 5:31 pm #499781 Back to Top REPORT
    aljburk
    aljburk

    Joined: 3/30/2009
    I found that WD-40 will also remove the sticky stuff very effectively. Worked like a charm when i took the factory installed wraps off my CX 3D Selects.
    April 27, 2010 at 9:01 pm #499782 Back to Top REPORT

    naildriverz7

    Joined: 4/14/2010
    has anyone the trid the new death grip. will it really work
    June 2, 2010 at 8:21 pm #499783 Back to Top REPORT
    s-rob
    S.Rob

    Joined: 11/5/2009
    Thank you for the post and pictures. followed your thread and removed the grip on my M-7. simple… also put the fccus on and am very pleased with the swap.
    S.ROB
Viewing 15 posts - 61 through 75 (of 108 total)