HOW TO: Remove and Replace Your Grip

[NGabowhunter Joined: 4/26/2006]

Awesome demo , I’ll save it.

[Joined: 5/24/2004]

This why I can’t stop reading these post on this web site

[buckeyebowman Joined: 9/9/2004]

I wanted to take my grip off and shave it down, but I was scared to death to try it. This great info helped greatly. Thanks! It's not how far you shoot, but how close you get.

[Kybowhntr Joined: 3/20/2006]

Thanks Scottyluck I just put my new Tronjo grip on and I followed your instructions.Very easy…….

[Arne Age: 53Joined: 5/16/2006]

Great Info Scottyluck!

I saved a copy for some future date when I might want to play with a new grip for the XT. Right now I’m just trying to get the basics taken care of.

Thanks Again. Switchback XT (why change from perfection?)

[Joined: 5/24/2004]

I was a bozo and didnt read this when i took it off and guess what I cracked my grip into two pieces. Luckily I have a Tronjo grip on the way

[Joined: 5/24/2004]

Those are the perfect instructions that you could not find any where else.
Thanks

[Joined: 5/24/2004]

Hi all! I’d just like to tell everyone that I recently installed a new Torqueless Grip on my OB. WOW!! What a difference it made in my shooiing. I couldn’t have been more pleased…..then for some reason the nose cracked and fell off. I was bewildered , to say the least. I immediately emailed Dave at Torqueless and he responded immediately. I offered to send it back to him or super glue it. He said that I could try that but should use a wood type glue instead……however what made my day was that he was going to send me a brand new one at no charge right away….NO Questions Asked!!!! WOW!! What service and prompt response. For those of you looking for a better grip setup, please give Dave at Torqueless.com a try…..You’ll be so glad that you did.

August 14, 2006 at 2:53 pm #499747 Back to Top REPORT

Joined: 5/24/2004

Nice illustration. That format works slick. Replaced my factory XT grip with a Hydrapress special last night. Excited to shoot this XT just recieved it last night.

August 17, 2006 at 4:52 pm #499748 Back to Top REPORT

Joined: 5/24/2004

that was easy, now I just need to wait till my grip comes in the next couple days.

Thanks for the walk through

August 22, 2006 at 4:08 pm #499749 Back to Top REPORT

thunderchicken21

Age: 28
Joined: 8/4/2006
Location: Ohio

Awesome post…great pictures to show exactly what you mean. Leaves no guess work!

All We Do Is SELFILMED

August 22, 2006 at 5:21 pm #499750 Back to Top REPORT

Joined: 5/24/2004

I took mine off last week no problems. When Mathews installed my stock grip on my XT, they used so little of the weather strip glue, that my grip was ready to nearly fall off. I never even used the hair dryer it was so loose. Simply pushed at the bottom and it popped off.

Got a new Torqueless grip in Desert Sand on the bow now. So much nicer.

August 22, 2006 at 5:37 pm #499751 Back to Top REPORT

thunderchicken21

Age: 28
Joined: 8/4/2006
Location: Ohio

thunderchicken21 wrote:

Thanks for this very informative post! It help alot.

If I may make a suggestion, anyone wanting to remove the glue easier should check out “goo Gone” It worked very well, did not lift the camo and wiped off the glue very easily after soaking for just 1 mintue.

Here is a shot of the clean bow.

and a shot of the product, I also found a small tube of the adhesive recomended by Scottyluck. Pictured below.

The finished product.
[/quote:17kstrwj]

Missed a spot…

All We Do Is SELFILMED

August 25, 2006 at 11:41 pm #499752 Back to Top REPORT

Joined: 5/24/2004

THANKS FOR THE TIPS.i just installed my new grip last night with no problems.just waiting for it to set up so that i try it out.i went to all the local automotive stores to try and find 3M adhesive,none of them had it.the only thing i could find was PERMATEX 82 black super weatherstrip adhesive. which is the same thing just a different brand i think

August 27, 2006 at 7:29 am #499753 Back to Top REPORT

Joined: 5/24/2004

Done mine yesterday, thanks for the info.
I think the TorqueLess grip looks awesome!!

[Joined: 5/24/2004]

Nice illustration. That format works slick. Replaced my factory XT grip with a Hydrapress special last night. Excited to shoot this XT just recieved it last night.

[Joined: 5/24/2004]

that was easy, now I just need to wait till my grip comes in the next couple days.

Thanks for the walk through

[thunderchicken21 Age: 28Joined: 8/4/2006Location: Ohio]

Awesome post…great pictures to show exactly what you mean. Leaves no guess work!

All We Do Is SELFILMED

[Joined: 5/24/2004]

I took mine off last week no problems. When Mathews installed my stock grip on my XT, they used so little of the weather strip glue, that my grip was ready to nearly fall off. I never even used the hair dryer it was so loose. Simply pushed at the bottom and it popped off.

Got a new Torqueless grip in Desert Sand on the bow now. So much nicer.

[thunderchicken21 Age: 28Joined: 8/4/2006Location: Ohio]

thunderchicken21 wrote:

Thanks for this very informative post! It help alot.

If I may make a suggestion, anyone wanting to remove the glue easier should check out “goo Gone” It worked very well, did not lift the camo and wiped off the glue very easily after soaking for just 1 mintue.

Here is a shot of the clean bow.

and a shot of the product, I also found a small tube of the adhesive recomended by Scottyluck. Pictured below.

The finished product.
[/quote:17kstrwj]

Missed a spot…

All We Do Is SELFILMED

[Joined: 5/24/2004]

THANKS FOR THE TIPS.i just installed my new grip last night with no problems.just waiting for it to set up so that i try it out.i went to all the local automotive stores to try and find 3M adhesive,none of them had it.the only thing i could find was PERMATEX 82 black super weatherstrip adhesive. which is the same thing just a different brand i think

[Joined: 5/24/2004]

Done mine yesterday, thanks for the info.
I think the TorqueLess grip looks awesome!!

[Author]

Posts