Heli-M cable rod set screw question

Home Forums General Archery Discussion Heli-M cable rod set screw question

This topic contains 3 replies, has 2 contributors, and was last updated by blackdog BlackDog 1 year, 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 21, 2013 at 9:55 am #570311 Back to Top REPORT
    blackdog
    BlackDog

    Age: 63
    Joined: 7/21/2004
    Have a quick question for those familiar with the Heli-M. Noticed that the riser is tapped on both sides of the cable guard rod. The shelf side doesn’t have a set screw installed. Are there supposed to be 2 set screws holding the rod to the riser or just one?
    March 21, 2013 at 5:46 pm #570384 Back to Top REPORT
    blackdog
    BlackDog

    Age: 63
    Joined: 7/21/2004
    Anyone????
    March 21, 2013 at 5:48 pm #570385 Back to Top REPORT
    danf
    DanF

    Age: 44
    Joined: 1/23/2007
    Location: PA
    View My Bows
    Just the one comes standard from the factory. Just make sure it is tightened down and you will be fine. However, if you feel better with 2 you can probably get one from your dealer. 1 is normal though, I wondered the same thing when I got mine!!!

    Sent from my iPhone using Tapatalk

    [https://0347f78499dbffa2d06c-6b5498c811253e5f302167b9d7af9fdc.ssl.cf2.rackcdn]
    March 22, 2013 at 8:49 am #570500 Back to Top REPORT
    blackdog
    BlackDog

    Age: 63
    Joined: 7/21/2004

    Just the one comes standard from the factory. Just make sure it is tightened down and you will be fine. However, if you feel better with 2 you can probably get one from your dealer. 1 is normal though, I wondered the same thing when I got mine!!! 

    Sent from my iPhone using Tapatalk

    Thanks {#emotions_dlg.mathews_thumbs_up}

Viewing 4 posts - 1 through 4 (of 4 total)