FX Z-CAM CAM TIMING

Home Forums Technical FAQ FX Z-CAM CAM TIMING

This topic contains 1 reply, has 2 contributors, and was last updated by mathews_archery Mathews_Archery 2 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 24, 2014 at 9:42 am #639984 Back to Top REPORT
    seaneharmon
    seaneharmon

    Joined: 8/14/2008
    i know this has been addressed before but i cannot find a solid answer or a picture of how to set the cam timing on the Z cam. i can find pictures for the Z2 cam but not the Z. any help would be greatly appreciated. i have come across the link previously posted for the pictures for cam timing but the link only leads to the mathews page and says that the page requested in currently unavailable.
    August 28, 2014 at 2:45 pm #640672 Back to Top REPORT
    mathews_archery
    Mathews_Archery


    Joined: 8/8/2014
    The original Z cam is a bit trickier than the Z2, but the same idea applies.  Using the cam lobe for the string and bottom of the “1” post as reference, you can see the yellow line parallel the string.    The red line is for the Z2 cams that have the timing holes.  Good luck!

    Max Cam Rotation

Viewing 2 posts - 1 through 2 (of 2 total)