Focus grip adhesive

Home Forums Technical FAQ Focus grip adhesive

This topic contains 2 replies, has 2 contributors, and was last updated by  elkdog 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 12, 2014 at 3:20 pm #633362 Back to Top REPORT

    elkdog

    Age: 61
    Joined: 7/12/2014
    Location: Missouri
    I just purchased a focus grip and it contained no adhesive.
    What does mathews recommend?
    July 12, 2014 at 5:33 pm #633369 Back to Top REPORT
    99fatboy
    99fatboy

    Age: 52
    Joined: 2/15/2010
    Location: n.y.
    Photo Gallery
    There should have been a die cut double sided adhesive with the grip, unless it was an old one. If you don’t have that, scuff the inside of the entire grip with abrasive pad or sand paper, clean with solvent or alcohol, and apply black weatherstrip adhesive and tape it to the riser until dry.
    black z7 magnum,tommy hogg,qad,b-stingers, vaportrail: blue smoke triumph,sword,hamskae,b-stingers:desert tactical chill R, tommy hogg,limbdriver pro v,ktech
    July 13, 2014 at 9:02 am #633385 Back to Top REPORT

    elkdog

    Age: 61
    Joined: 7/12/2014
    Location: Missouri
    Thanks for the reply, I will pick some up today.
Viewing 3 posts - 1 through 3 (of 3 total)