Draw length question

Home Forums General Archery Discussion Draw length question

This topic contains 2 replies, has 3 contributors, and was last updated by gjarcher gjarcher 2 years, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • April 5, 2013 at 2:00 pm #572941 Back to Top REPORT

    3D coalminer

    Joined: 8/31/2009
    Just wanted to know if Mathews draw length run long on the MR7 series all response will be appreciated.Thanks.
    April 5, 2013 at 2:08 pm #572943 Back to Top REPORT

    Age: 53
    Joined: 2/15/2010
    Location: n.y.
    Photo Gallery
    we have had most guys be most comfortable with mods 1/2″ shorter than normal draw length. in the end, it’s up to you, most dealers should have plenty of mods to try.
    black z7 magnum,tommy hogg,qad,b-stingers, vaportrail: blue smoke triumph,sword,hamskae,b-stingers:desert tactical chill R, tommy hogg,limbdriver pro v,ktech, black chill x pro, limb driver pro v,axcel accutouch pro,B-Stinger.
    April 5, 2013 at 2:56 pm #572947 Back to Top REPORT

    Age: 72
    Joined: 10/3/2006
    Location: Colorado
    View My Bows
    My experience also has been that the DL runs a bit long.

    Since the MR-series bows use DL modules, it is not an expensive solution to have extra modules, about $20 a set, and they can be exchanged with a simple hex wrench in a few minutes, no bow press required.

    FWIW, I’d recommend purchasing at least an extra set of modules 1/2″ shorter than whatever fits correctly at peak DW if you want to shoot the bow backed off  5 or more lbs for indoors, etc … the DL and Brace Height increase by a good amount after about three turns out.

Viewing 3 posts - 1 through 3 (of 3 total)