I have a CBE three pin scope on a Shibua slider. If I set my 20 yard pin I have no room for my 40 yard one. I want to use the 40 as a slider for 50 and 60 yards. But without touching my forty. Is the slider out to far? Should I bring it closser to my eye? Thank You for any response.
Well since I’m not sure how far you have it extended try moving it in by one inch and see if you can utilize the pin. The other thing that came to mind, is the sight in the right position and possibly turned up when it should be down. I have seen sights put on this way and it takes a minute to figure it out that it’s in upside down and pins just don’t setup. Just my .02.
Thank you for the reply. Moving it back fixed it. Because of my eyes I had to switch from a hunting sight to a slider and a scope. My hunting one was mounted a lot closer to the riser with five pins. No trouble. I should have figured it out right away. Again thank you.