Creed has left paper tear, nothing fixes it…help

Home Forums Archery Tech Forum Creed has left paper tear, nothing fixes it…help

This topic contains 6 replies, has 6 contributors, and was last updated by bobbor76 bobbor76 1 year, 4 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 26, 2013 at 12:09 pm #585885 Back to Top REPORT
    gaunt2011
    Gaunt2011

    Joined: 6/11/2011
    My creed has a tail left paper tear, nothing corrects it. I’m just about ready to sell it… Please help me!
    July 26, 2013 at 2:57 pm #585909 Back to Top REPORT
    reezentokill
    Reezentokill

    Joined: 6/2/2011
    When you say nothing fixes it. What all did you try?
    July 26, 2013 at 4:08 pm #585919 Back to Top REPORT
    gaunt2011
    Gaunt2011

    Joined: 6/11/2011
    Rest in and out, poundage up and down, 250 mayhems, 350 reds, 350 blue streaks, 300 gold tips, cam lean left and right.
    July 26, 2013 at 9:32 pm #585972 Back to Top REPORT
    wrkdvr
    wrkdvr

    Age: 35
    Joined: 2/5/2013
    Location: Virginia
    Borrow different arrows from friends…some shotguns don’t pattern well as others, even if they are the same make and model.

    Sent from my iPhone using Tapatalk 2

    July 27, 2013 at 5:27 am #586008 Back to Top REPORT
    jabber
    Jabber

    Joined: 8/2/2012
    Location: Ontario
    When you have maxed out in tuning and can’t get rid of that last little bit of tear, you have to Yoke tune the bow; adding / removing twists to one side or the other of the Y cable will fix your tear; you do need a bow press though or just take it to your dealer.
    July 27, 2013 at 11:06 am #586026 Back to Top REPORT
    gjarcher
    gjarcher

    Age: 71
    Joined: 10/3/2006
    Location: Colorado
    View My Bows
    No reason to double post … my input is here:  http://mathewsinc.com/forums-home/topic/creed-has-tail-left-paper-tear-nothing-fixes-it-help/#post-586025

    If you’ve followed the instructions and corrected any bow hand torque and/or string pressure on the face, then have the dealer check the following:

    – Correct DL

    – Bent/warped cam

    – limb pocket alignment

    July 30, 2013 at 1:57 pm #586425 Back to Top REPORT
    bobbor76
    bobbor76

    Age: 66
    Joined: 11/26/2004
    Location: South Dakota
    Shoot a 500 spine arrow thru it. If the tear is still there, you probably are having problems with plucking or triggering your release. Operator error !!
    Proud Member of yet to be named TEAM 3
Viewing 7 posts - 1 through 7 (of 7 total)