creed center shot

Home Forums General Archery Discussion creed center shot

This topic contains 6 replies, has 5 contributors, and was last updated by ohio-timberghost Ohio Timberghost 1 year, 6 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • June 22, 2013 at 11:50 am #581759 Back to Top REPORT
    superfastaccord
    superfastaccord

    Joined: 11/24/2006
    whats everyone ending up with for center shot? and other tuning specs for that matter?

    My creed seems to settle at 9/16 in order to get a perfect tare. My arrows seem to fly really good with the center shot being set so far in.

    Creed 70#
    28″ draw length
    27″ Da Torch 330 arrows

    June 22, 2013 at 11:57 am #581761 Back to Top REPORT
    jabber
    Jabber

    Joined: 8/2/2012
    Location: Ontario
    I have mine set sideways at 11/16 with a QAD HDX, up and down covering the berger hole with the arrow shaft (center of shaft lines up with centre of berger hole).  What kind of rest are you using?

    PS are you clearing the cables / not contacting them with 9/16? You must be close; check if you see a mark on the red cable, indicating slight fletch contact.

    • This reply was modified 1 year, 6 months ago by jabber Jabber.
    • This reply was modified 1 year, 6 months ago by jabber Jabber.
    June 22, 2013 at 11:16 pm #581807 Back to Top REPORT
    superfastaccord
    superfastaccord

    Joined: 11/24/2006
    QAD HDX as well. No fletch contact with the cables. I’m going to shoot it through the Hooter Shooter and see if the tare  is the same, it usually  pretty consistent with my results though.  Arrow is level centered over burger hole.

    It shoots great just wasn’t sure if that was common or if there was something else that may be off???

    June 24, 2013 at 9:44 am #581861 Back to Top REPORT
    superfastaccord
    superfastaccord

    Joined: 11/24/2006
    are we the only two people who purchased Creeds???
    June 24, 2013 at 9:49 am #581863 Back to Top REPORT

    cschwanz

    Joined: 9/12/2012
    Mine is hard to measure with a crappy ruler that I have but Im just a hair bigger than 11/16″. we’ll call it 23/32″. I may not be done moving it around though
    June 25, 2013 at 1:09 pm #582001 Back to Top REPORT
    upnorthmathewsguy
    upnorthmathewsguy

    Age: 39
    Joined: 6/6/2013
    Location: WI
    Photo Gallery
    View My Bows
    I also have a Creed and i just measured its center shot.. exactly 11/16 and arrow centered with the center of the burger hole.
    June 29, 2013 at 9:46 pm #582402 Back to Top REPORT
    ohio-timberghost
    Ohio Timberghost

    Age: 42
    Joined: 1/30/2008
    Location: Ohio
    Im at 11/16″ with my Creed also…28/60 …specs in sig
    CHILL 28/70 "BLACKOUT", QAD HDX, Ktech5 twin, HHA XL5519, T3 quiver, Goldtip XT 75/95's, Rage 2 blade Chisel's Drenalin 28/70 WB, B Stinger,HHA DSXL5519,GoldTip 75/95's, Rage 2 blade Chisel's
Viewing 7 posts - 1 through 7 (of 7 total)