Chill Axle to Axle

Home Forums Archery Tech Forum Chill Axle to Axle

This topic contains 2 replies, has 3 contributors, and was last updated by 5-rivers 5 Rivers 1 year, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 17, 2013 at 10:06 pm #574424 Back to Top REPORT

    Bill Wilcox

    Joined: 10/12/2010
    Hey guys, how important is the axle to axle on a Chill? Mine is over a 1/4″ off, but the timing marks are spot on. My axle to axle is almost 30 7/8. Is this something to worry about?
    April 18, 2013 at 8:53 am #574457 Back to Top REPORT
    canuck
    canuck

    Joined: 3/10/2010
    View My Bows
    I do not have a chill but have an MR7. The ata on one side is bang on at 33″ but the other side is 33 1/8″. Had some people I know with MRs check theres and everyones is off about the same.
    April 19, 2013 at 1:24 am #574560 Back to Top REPORT
    5-rivers
    5 Rivers

    Joined: 11/9/2006
    I would set to spec,  30.5″.    It will perform better.
    Mathews Solocam and Chill series
Viewing 3 posts - 1 through 3 (of 3 total)