Cable Serving Wear at the am

Home Forums General Archery Discussion Cable Serving Wear at the am

This topic contains 5 replies, has 5 contributors, and was last updated by bigeves34 BigEves34 4 years, 5 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 19, 2010 at 2:41 am #496438 Back to Top REPORT
    arrowshooter
    arrowshooter

    Joined: 9/22/2006
    The serving on the new cable on my Dren LD is already showing signs of wear where it rolls over the cam. I have read about the little tricks here and there and I need a consensus, so I am asking if I should put a on a little silicon wax, some “tip grip” glue, or do nothing.
    July 19, 2010 at 2:46 am #530687 Back to Top REPORT
    wishbone
    wishbone

    Joined: 2/6/2007
    Most of the time a good re-serve job will do the trick.
    July 19, 2010 at 11:14 am #530688 Back to Top REPORT
    c4-fan
    C4 Fan

    Joined: 10/26/2009
    google brownell cable fix. I have been using this product for 3 years now on all my Mathews bows. You simply serve this material into the seperation and the problem is done. This process takes a couple of minutes versus the 30-45 it takes to re-serve the cable.
    July 19, 2010 at 5:39 pm #530689 Back to Top REPORT
    wishbone
    wishbone

    Joined: 2/6/2007
    BCY also sells it called serving saver.[/i:1z74mjz1]

    July 19, 2010 at 5:47 pm #530690 Back to Top REPORT
    az-longbow
    AZ Longbow

    Joined: 5/8/2010
    I had a friend at Bass Pro Shop reserve the area on my Switchback string.
    It hasn’t worn since.
    July 19, 2010 at 6:48 pm #530691 Back to Top REPORT
    bigeves34
    BigEves34

    Joined: 8/29/2005
    If its just cable serving separation, then I wouldn’t care… but if there’s damage to your cable, then you’ve got to do something about it. I’d reserve the cable if its the latter. [=}=]
Viewing 6 posts - 1 through 6 (of 6 total)