Bow Tuning Guide…Updated!! -As Requested!!

Home Forums Archery Tech Forum Bow Tuning Guide…Updated!! -As Requested!!

This topic contains 307 replies, has 78 contributors, and was last updated by  jray57 5 days, 15 hours ago.

Viewing 8 posts - 301 through 308 (of 308 total)
  • Author
    Posts
  • September 30, 2013 at 10:51 am #596881 Back to Top REPORT
    bow-drawn
    Bow Drawn

    Age: 62
    Joined: 11/14/2007
    View My Bows
    {#emotions_dlg.mathews_idler}  {#emotions_dlg.mathews} {#emotions_dlg.mathews_nicethread}
    October 24, 2013 at 11:03 am #601153 Back to Top REPORT
    bow-drawn
    Bow Drawn

    Age: 62
    Joined: 11/14/2007
    View My Bows
    {#emotions_dlg.mathews_taunt} to the top for others to benefit from Neil’s training.
    November 26, 2013 at 8:52 am #608016 Back to Top REPORT
    bow-drawn
    Bow Drawn

    Age: 62
    Joined: 11/14/2007
    View My Bows
    This is not going away just yet. Way too much good stuff in this one.
    February 8, 2014 at 9:03 pm #618758 Back to Top REPORT
    turkey_picker
    turkey_picker

    Joined: 9/14/2010
    Location: Mississippi
    TTT

    Don’t let this information get lost.{#emotions_dlg.mathews_nicethread}

    2010 Z7, 28.5"/#70, 3-60 ACC's cut 27.5", 100gr G5 Montec total 406gr, Spot Hog Wrapped Right On 5 Pin, Axion GLZ 5" Stabilizer, Apex 5 Arrow Quiver
    March 3, 2014 at 1:14 pm #621162 Back to Top REPORT
    bow-drawn
    Bow Drawn

    Age: 62
    Joined: 11/14/2007
    View My Bows
    This is a good thread and is a great read for those doing their own tuning etc.
    March 26, 2014 at 7:41 pm #623831 Back to Top REPORT
    carl-parham
    Carl Parham

    Age: 66
    Joined: 10/8/2013
    Location: FL
    I’m new to archery and got my first bow April 2013 (’08 Mathews Drenalin in great condition). My axle to axle is 33 5/16″, should be 33″. I guess that would be string or cable stretch. Cables look like new. My timing holes are in line with the string. Brace Height is 7″ (per specs). I read Lost Arrow Archery tune procedures. Great info, very thorough and would take me forever. My question is how the axle to axle length being too long affects the bow’s performance. Does it affect draw length, draw weight, cam position, valley, bow jumping at full draw. What does it affect or cause.
    April 21, 2014 at 6:16 pm #627824 Back to Top REPORT
    texmex03
    Texmex03

    Joined: 4/10/2014
    Is neil still helping with these instructions?
    Whoever said, "Good things come in small packages.." Never owned a Mathews.
    July 6, 2014 at 7:41 am #632910 Back to Top REPORT

    jray57

    Joined: 4/8/2006
    TTT
Viewing 8 posts - 301 through 308 (of 308 total)