bohning helix jig

Dear Mathews Family –

We're excited to announce the launch of the all-new Mathewsinc.com coming very soon. We appreciate the support and feedback of this active online community, however, we will not be hosting a forum on the new site. We invite you to connect with us and each other on social media and other forums (Facebook, Instagram, Twitter, Bowsite.com, Bowhunting.com and Archerytalk.com), where your passion and experience can be shared with a wider audience to help grow this sport.

Home Forums General Archery Discussion bohning helix jig

This topic contains 3 replies, has 3 contributors, and was last updated by  MTmuledeerhunter 2 years, 12 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 17, 2013 at 7:36 pm #498297 Back to Top REPORT

    MTmuledeerhunter

    Joined: 12/13/2010
    Will the helix jig work on axis arrows or are they to small of diameter
    February 17, 2013 at 7:43 pm #553653 Back to Top REPORT
    raven
    Raven

    Age: 46
    Joined: 9/27/2008
    Location: Ohio
    I have fletched H diameter Easton shafts, not Axis. With either make sure to use the clamp release tape and prep the arrows to instruction. I was a fletching rookie before buying this jig, I like it. They give several center posts so I think it should work for Axis.[=}=]
    HeliM 27.5@56lbs Easton Bloodline 400's/ CX Blue Streak 250 Truball Max 4 /Short n Sweet/Ktech
    February 17, 2013 at 8:12 pm #553654 Back to Top REPORT
    danf
    DanF

    Age: 46
    Joined: 1/23/2007
    Location: PA
    View My Bows
    I have fletched FMJ’s and other Axis arrows with it and had no problems! [=}=]
    February 17, 2013 at 8:27 pm #553655 Back to Top REPORT

    MTmuledeerhunter

    Joined: 12/13/2010
    thanks I will give one a try
Viewing 4 posts - 1 through 4 (of 4 total)