Another release question

Home Forums General Archery Discussion Another release question

This topic contains 3 replies, has 4 contributors, and was last updated by  CHAS 2 years, 7 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 25, 2013 at 2:37 pm #497813 Back to Top REPORT
    drenleg1
    drenleg1

    Age: 41
    Joined: 2/9/2008
    Location: WV
    I have been contemplating switching from a Tru Ball Tornado wrist release to a 3 finger release for about 2 years now and haven’t made the leap. Does your draw length change with this switch? I really don’t want to drop the $ on a new cam also

    Thanks,

    70 lb Left Hand Mathews HTR set at 63 lbs. 29 inch draw 28 inch Beman ICS Hunter 340 at 412 grains 100 Grain Rocket Steelhead (old stock) Shooting 273 fps avg after 8 chrono
    January 25, 2013 at 2:45 pm #549301 Back to Top REPORT
    bow-drawn
    Bow Drawn

    Age: 64
    Joined: 11/14/2007
    Location: Ohio
    View My Bows
    No. Mine did not change but my anchor point did. And then you’ll have to adjust your peep sight possibly as well as your sight adjustment.
    January 25, 2013 at 3:00 pm #549302 Back to Top REPORT

    Jay Miller

    Joined: 2/6/2010
    View My Bows
    It can change the DL depending on the T Handle release throat but usually you can adjust the string/cables and DLoop to make up for the differences so you do not have to buy a new cam. You will most likely have a different anchor and will have to adjust everything else such as peep, sights and kisser (if you use one) to accommodate the new anchor. [=}=]
    Express yourself now - Fortune cookie
    January 25, 2013 at 3:01 pm #549303 Back to Top REPORT

    CHAS

    Joined: 1/30/2008
    your dl may change, it all depends on what release you choose. best to go to your local archery shop and try different models. like bow drawn, my dl did not change when i picked up a used carter insatiable 3. but i have my wrist release set fairly short.
Viewing 4 posts - 1 through 4 (of 4 total)