3d arrow for a creed

Home Forums 3-D & Target Archery 3d arrow for a creed

This topic contains 9 replies, has 5 contributors, and was last updated by kighty7 kighty7 1 year, 5 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • January 11, 2013 at 10:15 pm #497570 Back to Top REPORT
    tradtodd
    tradtodd

    Joined: 10/25/2010
    Location: Ny
    I am looking for a good arrow for 3d out of my 28.5/65# creed. Last year out of my mr7 at28.5/60 I was shooting fat boy 400. What would you suggest thanks for the help guys
    January 12, 2013 at 1:15 am #546834 Back to Top REPORT
    backhalfed
    backhalfed

    Joined: 10/5/2007
    Location: Ohio
    View My Bows
    Could use the same arrow more tha likely [=}=]
    January 12, 2013 at 1:27 am #546835 Back to Top REPORT
    tradtodd
    tradtodd

    Joined: 10/25/2010
    Location: Ny
    I’m going to play with them tomorrow and see how they fly and tune. They might be a little under spine but I’ll try them.
    January 12, 2013 at 1:41 am #546836 Back to Top REPORT
    backhalfed
    backhalfed

    Joined: 10/5/2007
    Location: Ohio
    View My Bows
    If they are spined right for that MR7 at 60lbs they WON’T be under spined for the creed at 65. The Monster has more stored energy wth those two cams thathe Creed with one and the MR has a faster IBO speed ;) [=}=]
    January 12, 2013 at 2:25 am #546837 Back to Top REPORT
    tradtodd
    tradtodd

    Joined: 10/25/2010
    Location: Ny
    Just came in from paper tuning and it’s a perfact hole so off to shooting in morning . I think it will be fine
    January 13, 2013 at 11:00 pm #546838 Back to Top REPORT
    tradtodd
    tradtodd

    Joined: 10/25/2010
    Location: Ny
    Well sighted it in yesterday and went and shoot a 3d with it today.I can say the bow shoots great and is forgiving for a 30 ata bow. I ended up with a 290 out of 300 with 9 x so I won’t complain at all. The creed is a great bow if you haven’t tried one give it a try. I’ve been shooting a mr7 for a few years now and the creed might take the top spot.
    February 14, 2013 at 5:41 pm #546839 Back to Top REPORT
    kighty7
    kighty7

    Joined: 11/26/2008
    Check out the Black Eagle Arrow Challengers. I shoot them out of my MR7 and they are great for 3-D.

    http://www.blackeaglearrows.com

    March 16, 2013 at 8:41 am #569066 Back to Top REPORT
    sqautch
    Sqautch

    Age: 44
    Joined: 12/25/2012
    Location: WI
    I am shooting 30″, and 62#, and using the new Easton Da torch 400 spine with 75gr tips for a total weight of 335 grains! Sure its not a big line cutter, but if you hit what you aim at….who cares? lol
    Hoyt bows...Easton DaTorch arrows, Carbon Express arrows,Ktech stabilizers, CBE sights, Carter and Tru Ball releases. Archery has helped save my life!
    March 19, 2013 at 12:50 pm #569943 Back to Top REPORT

    dalger

    Joined: 3/16/2013
    Location: va
    try gold tip 22 series with 100 gr points
    April 10, 2013 at 10:00 am #573369 Back to Top REPORT
    kighty7
    kighty7

    Joined: 11/26/2008
    I am shooting the Black Eagle Challengers out of my MR7 @ 60lbs. I am also shooting the Firenock Aero set up which is sweet. I love how they fly out of my MR7.
Viewing 10 posts - 1 through 10 (of 10 total)